STANDARD EQUIPMENT - ALUMINUM

A. TANK AND FITTINGS

• TANK CONSTRUCTION - Round cross section. Designed to meet 49 CFR 173.247, federal regulations.
• MODEL ARA - Cylindrical tank.
• 400° Temperature rating.
• EXTERNAL RINGS - One piece rolled channel rings, continuously welded to shell.
• SURGE PLATES - Two, full section, dished and flanged.
• INSULATION - 4" fiberglass, 1 lb. density.
• JACKETING - Aluminum, .040 inch jacket sheets and .080 heads.
• DISCHARGE VALVE - REAR, 6" Etnyre disc type model “RD”. External screw with 10" handwheel for ground control. 3" sloping unloading line, adapter and cap provided.
• ASPHALT VENT - Reservoir type, insulated, with removable cover for easy inspection, external vent to belly of tank.
• SPILL BOX - Around manhole with 3" external drain. Built-in rollover protection.
• MANHOLE - Etnyre quick opening 20" asphalt type. Includes 18" threaded rod with 3 adjustable marker discs.
• THERMOMETER - 2" dial type, degrees F. in closed well with window.
• MANHOLE PLATFORM: Open slip resistant grating in the form of an “L” on curb side and rear side of spill box.

B. TANK TRIM

• LADDER - To manhole, curbside. Aluminum construction with raised safety grip steps.
• TIRE CARRIER - Basket type with safety chain.
• HOSE CARRIER - 20' aluminum for 3" or 4" hose.
• FENDERS - Aluminum front and rear. Anti-sail rubber flaps at rear.
• BUMPER - 8" pressed steel channel conforming to DOT specifications, split for discharge pipe.
• LIGHTS - 12 volt L.E.D. type, meets FMVSS-108. Sealed cable 7-way receptacle. Stainless steel rear light boxes.

C. TRAILER UNDERCARRIAGE

• ADJUSTABLE UPPER 5TH WHEEL - 16" movement in 2" increments.
• LANDING LEGS - 2 speed vertical crank-type with pads, load bearing.
• SUSPENSION - Tandem axle Transpro Model 88, four 3-leaf spring with reduced freeplay, no-hop rear axle, rubber bushed suspension. 22,500# axles and 20,000# brake rating each axle. Stemco oil seals, air actuated 16 1/2" x 7" brakes, heavy duty cast iron brake drums with spring brakes to satisfy FMVSS-121, ABS.
• WHEELS - Steel disc, 10 hole, hub piloted.
• PAINT - All exposed steel parts painted black.

OPTIONAL EQUIPMENT

1. Lightweight 375º Temperature Rating.
2. 5" or 6" Insulation (4" standard).
3. Steam Coils.
4. 4" Rear Discharge Piping.
5. Sample Valve.
6. 3 Sided Refiners Platform.
7. 4 Sided Refiners Platform.
8. Etnyre 200 GPM Hot Products Pump.
9. 4" Front Pump Off Valve, 3" or 4" Line.
10. Deflector pan beneath manhole.
11. 20 Gallon Washout Tank - Pressurized.
12. Choice of Wheels.
13. Choice of Tires.
14. Air Ride Suspension.
15. Multiple Axle Configurations.
16. Placard Kit.
17. Paint, Choice of Color (Steel Parts Only).
18. Paint, Black Band on Center of Tank.