ChipSpreaders
   
 
Standard/Optional Equipment  
Brochure
Booklet
Municipal Bid Specs
 

 

STANDARD EQUIPMENT

Etnyre front wheel Hydrostatic Drive, Self-Propelled Chipspreader with computer control application rate and speed control, Dual Control Station with manual sliding Console/Seat Assembly, and including:

A. POWER TRAIN

  • Cummins Model QSB turbocharged diesel engine (240 H.P.).
  • Single speed hydrostatic 25000# front axle.
  • 25000# rear axle, all wheel power brakes.
  • 385/65R22.5-J tubeless, radial tires, wide base.

B. AGGREGATE HANDLING SYSTEM

  • (2) 24" hydrostatic driven conveyors.
  • 10' front spread hopper with hydrostatic driven spread roll.
  • Automatic conveyor control, including conveyor belt speed control.
  • Electric-hydraulic truck hitch control.
  • Electric-hydraulic folding wings at receiving hopper.

C. MISCELLANEOUS

  • Light package, electric horn.
  • Electric back up alarm bell.
  • Electric tachometer, hourmeter.
  • Engine warning system (low oil, water).
  • Front fenders and all other standard equipment per current brochure.

D. FIXED HOPPER

  • All gates powered; controlled at operator’s station.
  • Hoppers include (8) 6" gates; (4) each side.

OPTIONAL EQUIPMENT


AGGREGATED HANDLING SYSTEM

A. FIXED HOPPER

  1. Standard fixed hoppers include individual gates. Hydrostatic drive spread roll and agitator.
  2. To replace 10' spread hopper with larger spread hopper add:


  3.  WIDTH

     SHIPPING WEIGHT

     11' (3.36 m)

     (2,380 pounds)

     12' (3.66 m)

     (2,530 pounds)

     13' (3.96 m)

     (2,670 pounds)

     14' (4.27 m)

     (2,820 pounds)



  4. Second Agitator (Recommended if using sandy materials).

B. VARIABLE HOPPER

  1. Variable width two section hopper system. Including driven dual augers and spread rolls. Independent conveyor feed to each hopper. Hydraulic system with all pumps, hoses, valves and control system necessary for operation. Operating controls at both driver and right front operator stations. Expanded metal in top of hopper with replaceable grates under conveyor hoods. Installed on Hydrostatic Drive Chipspreader at time of new order production. Price in lieu of standard 10' spread hopper.
  2. HOPPER: 9'/18' Variable width from 9' to 18' includes air gates.
  3. HOPPER: 10'/20' Variable width from 10' to 20' includes air gates.
  4. HOPPER: 11'/22' Variable width from 11' to 22' includes air gates.
  5. HOPPER: 12'/24' Variable width from 12' to 24' includes air gates.

C. DRIVE SYSTEM

  1. 4-WHEEL HYDROSTATIC DRIVE PACKAGE: Mechanical front wheel drive steer axle, full oscillating, 75" wheel track, 20.37:1 gear ratio, 25,000# rated, single speed. Mechanical drive rear axle, 95" wheel track, 20.37:1 gear ratio, 25,000# rated, single speed. Traction control between front and rear axles. Both axles driven by 125 cc variable displacement hydrostatic pump and variable displacement hydrostatic motors. Infinitely variable speed 0 to 19.5 M.P.H.

D. CONTROLS/INSTRUMENTATION

  1. POWER SEAT PEDESTAL: Power controls to move operator’s station right or left side of unit.
  2. Operator's Cab - fully enclosed with A/C and heat (includes power seat pedestal).
  3. Umbrella.
  4. Strobe light mounted on telescopic stand.
  5. Corner LED Strobe Lights (at all 4 corners).
  6. 2 Wire Radio Plug at operator's station.

E. MISCELLANEOUS

  1. PAINTING: Special colors (Paint specifications must accompany order).
  2. EXPORT PROCESSING.


E. D. ETNYRE & CO. 1333 South Daysville Road Oregon, Illinois 61061
Phone 815-732-2116 Toll-Free 800-995-2116 Fax 815-732-7400 E-mail sales@etnyre.com